Awakened Audioworks

Technical Specifications

What each hardware stack can emit, what comes in each kit, and how the DIC v1.5.2 emission engine is built.

Application version 1.5.2  |  Effective Date: 13 September 2026  |  Last Updated: 15 October 2026

Honest numbers

Frequency and voltage figures below are the ranges DIC v1.5.2 uses for each Booster, drawn from manufacturers' datasheets. Where we have not yet confirmed a figure on our own oscilloscope, it is marked datasheet. Your real limit is always the narrower of what the Booster, the cable and the Conduit can carry.

Section 01Kits compared

Strap-On Full SpectrumGenny KitStrap-On Lite (bring your own)
Price£3,900£6,900Negotiable
IncludesTaxes, import duties and shipping—
BoosteriFi audio iDSD ValkyrieiFi audio iDSD ValkyrieYours — USB-C audio-class
Frequency0.1 Hz – 80 kHz0.1 Hz – 80 kHzas your Booster
Voltage p-pup to 11.2 Vup to 11.2 Vas your Booster
ConduitStrap-On electrode arrayGenny plasma field generator and the Strap-On arrayYours
HandsetMotorola 5G Android handset, DIC pre-installed and activatedYours — Android 14+, USB-C
CablesBraided copper USB-C cable, channel splitter, 16-gauge copper electrode wireYours — splitter required for electrodes
WearablesEmbroidered wrist/ankle cuffs, head/waist tie, hard-sided caseNot included
.X FilesThe complete library, pre-loadedBundles via Payhip, plus free releases to subscribers
ReinstallsTwo, within ten yearsTwo, within ten years
WarrantyHardware one year. Electrodes are consumable and not covered.Software and licence only
Returns45-day Mostly Money-Back GuaranteeDigital purchases are final

Section 02Boosters

The Booster converts and amplifies the handset's output. It alone sets the limits DIC calculates against.

Booster ranges used by DIC v1.5.2
BoosterFrequencyMax V p-pUsable from a handset
None — handset alone20 Hz – 20 kHz~1 VYes The phone's own speaker or jack. Extremely limited; for trying DIC out, not for real work.
Tanchjim Space Pro8 Hz – 80 kHz5.6 VYes USB-C digital audio. The standard choice. Datasheet.
iFi audio iDSD Valkyrie0.1 Hz – 80 kHz11.2 VYes Higher voltage and a wider low end. Datasheet.
Digilent Analog Discovery 30.01 Hz – 12 MHz10 VNo Laboratory instrument driven by desktop software. DIC shows a warning if selected.
TiePie Handyscope HS50.01 Hz – 40 MHz24 VNo As above — desktop only.
Other (you enter it)0.01 Hz – 5 MHz0.5 – 45 VYes, if audio-class Enter four figures from your datasheet: minimum and maximum frequency, minimum and maximum voltage. If your phone does not list it as a sound output, DIC cannot drive it.

Transparency, clarity, unity

DIC cannot detect what is plugged in; it works from what you tell it. A mismatch is rarely deliberate — usually an unclear datasheet or a well-meant assumption. Selecting a Booster with a higher ceiling than yours means signal will be calculated for a range your device cannot carry. When unsure, understate. Signal-generator support from a handset is being worked on.

Section 03Conduits

From version 1.5.2, the Conduit you select is for reference only. It is saved to your profile and reminds you of the typical range for that class of device, but it plays no part in the arithmetic. Only the Booster limits or extends what is emitted.

Typical ranges for the class — reminders, not limits
ConduitTypical rangeNotes
None — handset alone20 Hz – 20 kHzSound from the phone's speaker into the room.
Earbuds or headphones20 Hz – 20 kHzNot recommended. See the headphone advisory.
Strap-On electrodes0.1 Hz – 10 kHzSkin and tissue pass lower frequencies well and resist higher ones.
Genny plasma field emitter100 Hz – 10 MHzThe tube can carry far more than an audio Booster can feed it, so the Booster is your limit.
Other plasma or noble-gas emitter100 Hz – 10 MHzTubes vary widely between makers. Consult your own hardware's documentation.
Long-distance — radionics—In development Will appear here with real figures when released.

Section 04Harmonic folding

An .X File may name a frequency your Booster cannot carry — 7.83 Hz on a Booster whose floor is 8 Hz, say. Rather than dropping the note or clipping it, DIC moves it by whole octaves (doubling or halving) until it sits inside your range. The note keeps its harmonic relationship to everything around it: the same note in a different register. 7.83 Hz on a Tanchjim Space Pro becomes 15.66 Hz.

Because DIC renders digitally, any number of frequencies can sound at once through an audio Booster — it mixes them into a single stream per channel. A five-note carrier plus the track taking its turn is six at once, which is ordinary. The background is in The Octave as Common Ground.

Section 05The emission engine

Waveforms — for tracks and for the carrier

WaveformShape
SinePure sinusoid.
Inverted sineSine shifted by 180°.
TriangleLinear ramp up, linear ramp down.
Square, 50% duty cycleSymmetric pulse — on half the cycle, off half.
Square, 90% duty cycleAsymmetric pulse — on nine-tenths of the cycle.
Sweep upFrequency rises linearly from a start to an end frequency.
Sweep downFrequency falls linearly from a start to an end frequency.

DC offset — for tracks and for the carrier

None, positive or negative bias, per standard electrical conventions. Note that most audio-class Boosters block direct current at their output, so an offset may not survive the trip from handset to Conduit.

Gating

An on/off envelope laid over the emitted waveform, set as a single number. It defines the rhythm with which the signal is switched on and off. For sweeps, it also sets the sweep's duration.

Carrier modes

ModeNotesExample on a 7.83 Hz base
NoneTracks only.—
SingleOne wave at the base note.7.83 Hz
TriadThree notes, each 4× the one below (two octaves).7.83 · 31.32 · 125.28 Hz
PentadFive notes, each 4× the one below.7.83 · 31.32 · 125.28 · 501.12 · 2,004.48 Hz

The carrier has its own waveform, gate and DC offset. All notes in a chord share the carrier's waveform.

Track fields

FieldInput
FrequencyHz, to two decimal places, number pad only
GateTo two decimal places, number pad only
WaveformOne of the seven above, spelled out in full
DC offsetNone, positive or negative, spelled out in full
Left / right balance0–100% per channel
Sweep start and endHz, to two decimal places — sweeps only

Every one of these parameters is saved inside the .X File. See the File Format Comparison.

Section 06PRAYERSONG

Input languagesEnglish (UK), Spanish, French, German, Portuguese, Japanese, Korean, Mandarin Chinese
Translated intoAncient Aramaic or Ancient Latin, your choice
EncodingA timed dot-and-dash code, each symbol carried as an upward half-sine sweep
Sweep rangeCalculated from your Booster's maximum frequency: the floor is seven octaves below it; the ceiling is the highest multiple of the base chord (639 Hz by default) that fits within it. On a Tanchjim Space Pro: 625 Hz to 79,875 Hz.
Binaural bedA continuous, ungated square-wave pair, one frequency per ear, sounding throughout
LengthUp to 45 minutes, or up to 999 repetitions — whichever ends sooner. Repeats loop without gaps.

Section 07Player and timers

FeaturePurposeSettings
StopStops at once and returns to the start of the track.—
Rest timerPauses emission now, resumes automatically.1-minute steps; extend, shorten or end early while running
Break timerInserts a break automatically after a run of continuous emission.Begins after 1–90 minutes; lasts up to 60 minutes; 1-minute steps
Sleep timerStops emission, saves the session and closes the application.1–12 hours plus 0–55 minutes in 5-minute steps; cancel, extend or sleep now
SearchFilters the library live as you type.By category, keyword, author, and signed or unsigned

Some of these controls are arriving in updates after 1.5.2 — see the Changelog for what is live today.

Section 08Platform

Operating systemAndroid 14 or newer
Tested handsetMotorola 5G (XT2413V)
Connection to BoosterWired USB-C (OTG), USB audio class
NetworkNone required after a one-time activation. Kits arrive activated.
Interface languagesEnglish, Spanish, French, German, Portuguese, Japanese, Korean, Chinese
AccessibilityLarge, high-contrast type; colour-blind-safe colours; options spelled out in words rather than symbols; number pad for every numeric field
File format.X File — signed parameter file, rendered live

Section 09Booster detail — Tanchjim Space Pro

Tanchjim Space Pro Booster held between two fingers, with its short USB-C cable
Tanchjim Space Pro, about 4 cm long.

Manufacturer's published figures for the Tanchjim Space Pro, a popular bring-your-own Booster. Manual: audiophonics.fr.

HousingAviation-grade aluminium alloy, CNC machined, transparent window
ConnectivityWired USB-C (OTG) to the Android handset
Weight · size14.8 g · 4.1 × 2.1 × 1.2 cm
Power input5 V DC via USB-C, tolerance 4.5–5.5 V
Output level4 Vrms balanced high gain / 2 Vrms balanced low / 2 Vrms unbalanced high / 1 Vrms unbalanced low
Rated outputup to 230 mW per channel into 32 Ω
Background noise1.3 µV balanced / 1.1 µV unbalanced
Dynamic range132 dB balanced / 127 dB unbalanced
THD+N0.00017% balanced / 0.00019% unbalanced
Decoding32-bit / 768 kHz PCM, native DSD256
ChannelsTwo independent paths, left and right, each with its own conversion
Output ports3.5 mm and 4.4 mm
Operating range0–40 °C (32–104 °F), away from moisture

Current at the skin

Current depends on the load. At a typical 500 Ω skin-contact load, 5.6 V peak-to-peak gives a peak current of about 5.6 mA; at the lowest intensity settings it falls into microamps. Start low. See Electrical Safety.