Awakened Audioworks

User Manual

Every part of the application, what it does, and why it behaves the way it does.

Application version 1.5.2  |  Last Updated: 15 October 2026

Before anything else

DIC is a meditation instrument. It is not a medical device and does not provide medical treatment. Do not use it if you have a pacemaker, implanted defibrillator or other implanted device, if you are pregnant, if you have epilepsy or a seizure disorder, or if you have a cardiac condition. Placement is yours to choose; the commonly used positions are the wrists, kidneys and temples.

Section 01First principles

Three ideas explain most of how DIC behaves.

Nothing is cut

An .X File names frequencies. Your hardware has limits. When a named frequency falls outside those limits, DIC moves it by whole octaves until it fits. An octave is a doubling, so the note keeps its harmonic relationship to everything around it — the same note in a different register, not a different note. Other applications clip or distort. This one transposes.

The application cannot see your hardware

Android does not tell an application what is plugged into it in enough detail to identify a model. Guessing would mean folding frequencies against the wrong limits, which is worse than asking. So DIC asks, and everything is calculated from your answer.

Nothing leaves your device

No account, no cloud, no Bluetooth, no internet. Your profiles, playlists, history and creations live on the handset alone. That is what keeps your sessions private, and it is also why backing up matters — see section 13.

Section 02Profiles

DIC Choose a profile screen

Each profile keeps its own library, playlists, favourites, history and hardware selection, so a shared DIC does not muddle two people's work.

Section 03Your hardware

One selection governs every emission: your Booster. It sets the frequency floor and ceiling, and the voltage, that DIC calculates against.

You also choose your Conduit. Since version 1.5.2 this is for reference only: it is saved to your profile and shows the typical range for that kind of device as a reminder, but it plays no part in any calculation.

Both live in your profile and can be changed from the Soundscape studio without leaving it. Tap the information icon to see the published range of every listed device. The full table is in the Technical Specifications.

Choose honestly

DIC cannot check your answer. Telling it you have a wider Booster than you really do means signal being sent where the device was not built to carry it. When unsure, understate. If your device is not listed, choose Other and enter the four figures from its datasheet.

Two devices appear in the list marked not usable from a handset: laboratory signal generators such as the Digilent Analog Discovery and TiePie Handyscope. They reach far wider than any audio device but are driven by desktop software with no Android version. They are listed rather than hidden so that owners know why.

Section 04The library

Everything available to you, in one list.

Each row shows the name, the author, the description if the file carries one, and how many frequencies it holds.

Section 05Playlists

Tapping a playlist opens it rather than starting emission, so you can see what is inside first.

Section 06The player

Once something is emitting the player stays visible everywhere in the application, in one of three sizes.

SizeWhat it shows
Full screenName, author, description, notes, categories, progress, and the queue — the tracks already emitted (dimmed), the one emitting now, and those coming up.
MinimisedName, author, description, categories, and any running sleep or rest countdown.
TickerA single scrolling line: track, author, time remaining, and both countdowns.

Stop halts emission at once and returns the track to 0:00; the player stays on screen, and Play starts again from the beginning. Back restarts the current track; tap it again within two seconds to go to the previous one. Repeat cycles through Off, One and All — with Off, emission stops when the queue ends.

The full player also shows which playlists the current file belongs to; tap to open them.

Emission continues with the screen locked. Locking the screen is worth doing on a long session — the display uses more power than the emission does.

If the Booster is unplugged, emission pauses and a notice appears. Plug it back in and both clear by themselves; the session resumes where it stopped. A pause you made deliberately is left alone.

Section 07Rest, break and sleep timers

Version 1.5.2 defines the three timers below. Their new controls arrive in an update; until then, the 1.4.4 behaviour applies — a sleep timer set as a time of day, and rests of one to thirty minutes.

Rest timer — pause now

Break timer — pause on a schedule

Sleep timer — close down

Section 08Intensity

Set in Settings, applied to everything. Start low and raise it slowly. You are looking for a level you can just feel; more is not better, and a level comfortable on the forearm may not be on the calf.

After about thirty minutes the application will suggest a rest. That suggestion is worth taking.

Section 09The Creator Studio

Two kinds of file can be made.

Soundscapes

A list of tracks, each emitted in turn, over a carrier that runs beneath the whole set.

The studio states how many frequencies will sound at once — the carrier notes plus the track taking its turn. A pentad needs six. This matters only for hardware with discrete channels; an audio Booster mixes any number into one stream.

Prayersongs

Written words, translated into Ancient Aramaic or Ancient Latin, turned into a timed sequence of upward sweeps in the manner of Morse code, over a continuous binaural bed.

Offline spell checking is available in six languages.

Japanese is not spell checked. Japanese is written without spaces, so a word list cannot check it without a morphological analyser. Rather than pretend otherwise, the feature is simply absent and said so.

Section 10Signed and editable files

Two kinds of file, and the difference is visible at a glance.

SignedYours
Marked withA lock, and a verified badge in the libraryA pencil
Name, description, categoriesFixedEditable at any time
WhySo a published file always emits exactly as publishedBecause it is your work

Tapping the lock on a signed file opens its details read-only, with an explanation. Nothing is hidden — it simply cannot be altered.

Files you create are unsigned and carry your name as plain text, which anyone could change. Creators who want their work provably theirs can request a signing key from us; a signed file can then be verified as genuinely yours and unaltered.

Section 11Importing and exporting

A bundle is only as shareable as what is in it. A file bound to one handset arrives bound to that handset. Work you made yourself travels freely.

Section 12Languages

DIC safety warning 3 of 3: create at your own risk
Warning 3 of 3. Each warning must be acknowledged before the application opens.

The interface is available in English, Spanish, German, French, Portuguese, Korean, Japanese and Chinese.

Changing language brings the safety warnings back, in that language. Dismissing them for twenty-eight days silences them in that language alone — another language will ask again. Safety advice read in one language has not been read in another.

Section 13Backing up

The one thing in this manual worth acting on today

Purchased material can be restored, because it is tied to your licence. Files you made yourself cannot. If the handset is lost with no backup, your own creations are gone — no reinstall, warranty or replacement can bring them back.

Export your library and your playlists in the first week, and again whenever you make something you would miss. Keep the export somewhere other than the handset.

Your licence moves to a new device twice at no charge, within ten years of purchase, so the licence itself is not the fragile part. Your work is.

Section 14If something goes wrong

What you seeWhat to try
Nothing is emittedCheck the Booster is seated, the intensity is above zero, and the lead wires are fully in at both ends.
Booster disconnected noticeReseat the cable. If it persists with the cable firm, try another cable — that is the usual culprit.
One side onlySwap the two lead wires. If the dead side follows the wire, the wire is at fault; if it stays put, the splitter is.
Prickling under a padLower the intensity and check the pad is flat on clean dry skin with no lifted edge. A pad that has lost its tack concentrates the signal.
A file will not openIt may be damaged, or bound to a different handset. If we supplied it, write to us and we will replace it.
Countdowns not showingThey appear only when a sleep, rest or break timer is actually set. Check Settings.
The handset feels warmNormal on a long session with the screen on. Lock the screen.

Anything not answered here: awakenedaudioworks@gmail.com, or telephone and text to +1 234 200 6697. We would rather answer the same question a hundred times than have anyone guess.